Zhiyun Crane 2 3 Axis Handheld Gimbal Stabilizer 3-Axis Handheld Stabilizer with Follow focus
Gain greater control over your gimbal shots with the Zhiyun-Tech Crane-2, a 3-axis handheld stabilizer with an integrated follow focus control for select Canon cameras. The Crane-2 supports DSLRs, mirrorless cameras, and camcorders weighing up to 3.2kg. Connect your Canon DSLR or mirrorless camera (released after 2008, with an original autofocus lens) to the gimbal via cable, then adjust focus using the large thumbwheel on the handgrip. The Crane-2 offers three levels of focus control, enabling you to fine-tune your focusing based on the lens used, and the shot itself.
Product Specification
| Item | Min | Standard | Max. | Remark |
|---|---|---|---|---|
| Operation Voltage | 9.8V | 11.1V | 12.6V | |
| Operation Current | 110mA | 6000mA | ||
| Charging Voltage | ||||
| Charging Current | ||||
| USB Output Voltage | 5V | |||
| USB Output Current | 8V | |||
| Camera Charging Output Voltage | 2A | |||
| Camera Charging Output Current | ±0.01° | ±0.03° | ||
| Following Deviation in Static State | ±0.05° | ±0.1° | ||
| Following Deviation in Motion State | -135° | +185° | ||
| Tilt Angle Range | 360° | Unlimited Rot. | ||
| Roll Angle Range | 360° | Unlimited Rot. | ||
| Controllable Tilt Angle | ||||
| Controllable Roll Angle | ||||
| Controllable Pan Angle | ||||
| Operation Temperature | -10°C | 25°C | 45°C | |
| Battery Runtime | 12h* | 18h* | Balanced center of gravity | |
| Charging Time | 2.5h | |||
| Valid Payload | 500g | 3200g | ||
*A Maximum run time of 18 hours if the unit is kept in a constant position. In full operation mode battery expectancy based on Movement and Camera weight would be 2-3 hours.
How To Buy
